Angle Polisher

   It is mainly to make up for the small defects on the surface of the paint film such as coarse grains, sandpaper marks, flow marks, whitening, and orange peel that may appear on the surface of the car after spraying. The treatment method is to perform grinding and polishing after spraying to improve the paint surface The mirror effect of the film can meet the requirements of brightness, smoothness and gorgeousness.

Operation precautions

  The key to the operation of the polishing machine is to try to get the maximum polishing rate in order to remove the damage layer produced during polishing as soon as possible. At the same time, it is necessary to ensure that the polishing damage layer will not affect the final observed tissue, that is, it will not cause false tissue. The former requires the use of coarser abrasives to ensure a greater polishing rate to remove the polished damage layer, but the polishing damage layer is also deeper; the latter requires the use of the finest materials to make the polishing damage layer shallower, but the polishing damage layer is deeper. The rate is low. The best way to solve this contradiction is to divide the polishing into two stages. The purpose of rough polishing is to remove the polishing damage layer. This stage should have the largest polishing rate. The surface damage caused by rough polishing is a secondary consideration, but it should be as small as possible; followed by fine polishing (or final polishing), Its purpose is to remove the surface damage caused by coarse polishing and minimize the polishing damage.