Detailed steps for quick installation of chainsaw

1. Install the wood slotting teeth, 2. Install the guide plate, 3. Install the chain, 4. Press the arrow to align the installation side cover, 5. Screw on the nut to pre-tighten, 6. Adjust the chain tightness, 7. Just pull it off by hand, 8. Sleeve lock nut, 9. Complete the installation.

   
   

Detailed explanation of the steps to quickly start the chain saw 

1. Add oil, the main function is to lubricate the chain, the choice of oil is ordinary oil. 2. Add gasoline, the mixture ratio of gasoline and engine oil is 25:1, it must be two-stroke engine oil, must use two-stroke engine oil, can not use four-stroke or other engine oil, otherwise it will easily cause the machine to pull the cylinder or other problems, gasoline and two-stroke engine oil After the oil is added to the same scale, cover the lid, shake it up and down, and then add it to the fuel tank. 3. Toggle the start switch upwards, 4. Pull the damper out 5. Start the handle, pull the start handle 5-8 times or so, when you hear the banging sound of the machine, you can 6. Close the damper, 7. At the next Pull the starter rope to start. 7. Press the accelerator and accelerate slowly for several times, and it can work normally.