The clean water pump is used for conveying clean water and other liquids with similar physical and chemical properties to clean water. Irrigation, bathroom and other hot and cold water circulation pressurization and equipment.

Clean water pump Discrete clean water pump, horizontal clean water pump, single-stage clean water pump, multi-stage clean water pump, centrifugal clean water pump, self-priming clean water pump.

Orchard single-phase clean water pumps are divided into self-priming pumps, water-filled pumps and submersible pumps. The selection principle is:

1. Self-priming clean water pump: The water source is of good quality, and the working position is relatively fixed. The suction lift is within 3.5 meters. The working efficiency is slightly worse than the chemical pump. When put into operation for the first time, the circulating emptying water should be added first, and the water pump can complete the self-priming.

2. Water-filled clean water pump: the water quality is good, the mobility of the large pipeline is relatively unstable, and the actual lift within 2.5 meters of suction is within 32 meters. Higher efficiency. The suction pipe should be well sealed.

3. Submersible clean water pump: the water source is sufficient and the lift is low, and the valve is suitable for irrigation with large water volume in farmland orchards. Because the whole submersible pump is put into the water and the working axis pushes the water up, reducing the water output will increase the pump load. Therefore, do not install a valve in the outlet pipe of the submersible pump to prevent the motor from being burned out due to the excessive resistance of the pump when the valve is turned off.

1. Better performance

With powerful motor device and reasonable body design

Efficient and low noise.

The waterway parts are specially treated, which is not only not easy to rust, but also has good wear resistance.

2. It is economical and practical.

Energy-saving design and reasonable price, help you improve the quality of life.

3. Simple setup/assembly, easy to use

A new process design is adopted, making it easy to assemble and maintain.

With self-priming function.