How to Use:

1. Open the sprayer,take out all accessories, hose, switch, spray rod, nozzle, hand rocker, connecting rod, spray rod fixing frame, etc. 

2. Connect one end of  the hose to the water outlet and tighten the other end to the lower part of the switch.

3. Put the rubber pad into the upper part of the switch, connect the nozzle and tighten it.

4. Put a rubber pad on the other end of the spray rod, connect the nozzle and tighten it.

5. Connecting rod, spray rod fixing clip and sprayer.

6. Insert the hand rocker into the hole below the sprayer, and then connect the connecting rod with the hand rocker.

7 The assembly is complete.

Before use, add a small amount of water to shake up and down several times to check whether the pressure is normal and whether the connection parts leak.

1.When it is used formally, it is necessary to add the mother liquid of the medicine first and then add water. The liquid level of the medicine liquid cannot exceed the safe water level. Before spraying, pull the rocker more than 10 times to make the pressure in the barrel rise to the working pressure. Do not use too much force when pulling the rocker, so as not to explode the air chamber.

2. After mixing the liquid, make sure to stir evenly to prevent the uneven concentration of the liquid from affecting the efficacy.

3. The diluent must be cleaned to prevent the blocking switch or nozzle in the spray process, and sometimes it will affect the efficacy.

4. Single nozzle can be used for small area spray;double nozzle can be used for large area spray and straight nozzle can be used for long distance spray.

5. After the work is completed, the residual liquid medicine in the bucket should be poured out in time, and washed with clean water and dried. At the same time, check whether there is water in the gas room and dry it.

6. When spraying highly toxic pesticides, wear long sleeves, wear a mask, do a good job of body protection, do not smoke and eat, in order to prevent poisoning.