1.Open the reel of the tape cutter, put the whole roll of tape into the tape cutter, and fix the tape roll with a fixing core.

2. Then pull out the front end of the whole roll of tape and put through the gap between the front axle and the bottom of the tape cutter. In order to smoothly pull out the tape, make sure the adhesive side of the tape is facing down

3. Pull down a piece of tape, then gently pull back on the blade to cut the tape.

You can tighten or loosen the tension adjustment button on the tape cutter according to your preference, so that you can control the speed of the tape pulling out according to your preference.

4. Many people may encounter the problem of how to install the tape into the tape cutter. First of all, you need to directly remove a thick tightening rod in the tape cutter, put the rubber side of the tape up, pass through the rubber roller and metal bracket, and press the rubber roller to keep the tape in balance with the roller.

The serrations of the tape cutter are hard. If you are not careful, you may scratch your hands. You should tidy them up immediately after use to avoid accidental injury to others.

The use method is very convenient